There are a lot of owners who prefer color rich skirting. The skirting line made of ceramic tile is more durable, so it is also loved by many consumers. Seemingly simple is the skirting line, in the selection and construction are a lot of attention. Let's take a look at the details. I hope our following introduction will be useful to you.

How to choose the height of skirting line

How to choose the height of the skirting line? How much is the setting better? In order to achieve a better visual effect, the setting of the skirting line must be based on the proportion and functionality. The general height of the skirting line is 8-12cm, and if it is lower than 8cm, the proportion is asymmetric, creating its significance and visual effect. If it is higher than 12cm, it is too eye-catching and has the feeling of being a noisy host.

Skirting line construction strategy 1

Sticking: This is a construction method. According to the wall marking and standard horizontal line, the bottom ash shall be plastered with 1:2-1:2.5 cement mortar, and the scratch shall be carried out. After the bottom mortar is dry and hard, the wet and dry tile skirting board can be plastered with cement for sticking. When sticking, it needs to use a rubber hammer to strike it flat, and often use a level ruler and a guiding ruler plate to level and straighten it. Wait for the next day, and then use the same color of cement mortar and floor to wipe the seam.

Skirting line construction strategy 2

Grouting: This is another construction method. The skirting board shall be temporarily fixed on the installation position, and the adjacent two skirting boards and skirting boards shall be stable and firm with the ground and wall through gypsum. After that, grouting shall be carried out with 1:2 cement mortar with a consistency of 10-15 cm. When grouting, it is necessary to wipe the spilled mortar at any time. After the final setting, wipe the plaster shovel clean and wipe the joint with the cement paste with the same color as the board surface.